Application scope of duplex pipe clamp!

Application scope of duplex pipe clamp!
The development of many industries in life is inseparable from the heavy pipe clamp. Sometimes some insignificant factors may lead to a big gap. For example, the premise has been passed. Today, let's learn about "how long can the pipe clamp be used? Application scope of duplex pipe clamp".

What follows is the tentative imitation in China. At present, many large and small manufacturers in China have launched pipe clamp valves, which have quickly occupied some markets with ultra-low prices, which has brought some misunderstandings to users who have just come into contact with this valve, such as: the service life of pipe clamp valves is too short, the pipe sleeve is usually broken in a few months, or even months, and their rubber technology is not enough to produce high wear resistance, high corrosion resistance Long life rubber pipe sleeve. According to textual research, the early batch is still in use today. Even for ordinary imported pipe clamp valves, the average service life is much longer than that in China. Of course, the user can determine the pipe clamp energy and how long the pipe clamp can be used according to the actual situation. After all, the relative price of imported valve products is high.
Light pipe clamps are used for ordinary mechanical pressure pipes of 6 size series, with an outer diameter of 6-57mm. Double pipe clamps are used for mechanical pressure pipes of 5 size series, with an outer diameter of 6-42mm. The heavy pipe clamp is used for high mechanical pressure pipes of 8 size series, with an outer diameter of 8-273mm.
The material characteristics of the pipe clamp are density, bending strength, impact toughness, compressive strength, elastic modulus, tensile strength and temperature resistance.
Before assembly, in order to better determine the direction of the clamp, it is recommended to mark the fixed position first, then weld, insert the lower half of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the pipe clamp body and the cover plate and tighten it with screws. Do not directly weld the bottom plate with pipe clamp installed. Install the guide rail on the ground. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees. Insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put the upper half of the pipe clamp body and cover plate, which are fixed with screws. For stacking assembly, the guide rail can be welded on the foundation or fixed with screws. First install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, and prevent it from rotating through the anti loosening cover plate. Then install the two pipe clamps in the same way as above.