How to install the double pipe clamp?

How to install the double pipe clamp?
Before assembly on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixed position of the duplex pipe clamp, then weld, insert it into the lower part of the pipe body, and then put the pipe to be fixed into the pipe body. Cover the other half of the duplex clamp and screw it down. Do not directly weld the base plate of the pipe clamp.
On the double pipe clamp grounding guide rail, the guide rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and rotate it 90 degrees. Insert the lower half of the pipe into the nut, put in the double pipe clamp to be fixed, and then put in. The upper half of the tube body and the cover are fixed with screws.

The double pipe clamp is applicable to general mechanical pressure pipes of 5 sizes. The outer diameter of the double pipe clamp is 6-42mm. The duplex pipe clamp includes a long head bolt, a safety part, a pipe clamp body, a welded bottom plate and a fixing bolt, and pipe clamps with different hole numbers are selected according to the arrangement sequence. Number of double pipe clamps, double pipe clamps and pipes.
For stacking components, the guide rail can be welded on the foundation, and the duplex pipe clamp can be fixed with screws. Install the upper and lower halves of the double pipe clamp, fix the double pipe clamp, then fix the upper half of the pipe body with screws, and then pass the anti loosening cover. Prevent it from turning. Then install the two clamps in the same manner as above.