The manufacturer of light pipe clamp tells you what is the use of guide rail nut?

The manufacturer of light pipe clamp tells you what is the use of guide rail nut?
Nuts are nuts, which are screwed together with bolts or screws for fastening. According to different materials, they are divided into carbon steel, stainless steel, non-ferrous metals (such as copper), etc.
Install the guide rail on the ground. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees. Insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put the upper half of the pipe clamp body and cover plate, which are fixed with screws.

For stacking assembly, the guide rail can be welded on the foundation or fixed with screws. First install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, and prevent it from rotating through the anti loosening cover plate. Then install and pipe clamp in the same way as above.
For the assembly of elbow, Yongsheng pipe clamp shall be directly used at the front and rear of the elbow. It is recommended that such support points should be fixed.