What are the main installation processes of light pipe clamps?

What are the main installation processes of light pipe clamps?
The light pipe clamp locking device comprises a plastic pipe clamp and a locking device. The light pipe clamp is characterized in that the locking device is arranged on the metal pressing plate at the top of the fastened plastic pipe clamp, two bolt holes are arranged at both ends of the locking device of the light pipe clamp, and three tooth shaped baffles are arranged outside the bolt holes. The bolt hole size of the locking device is the same as that of the metal pressing plate at the top of the plastic pipe clamp. The material of the locking device is q235-a. Compared with the prior art, the beneficial effect of the utility model is that the plastic pipe clamp anti loosening device has the advantages of simple structure, low cost, convenient disassembly and assembly, and plays a good anti loosening role.

It shall be assembled on the welding plate. Before assembly, in order to better determine the direction of the light pipe clamp, it is recommended to mark the fixed position first, then weld, insert the lower half of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the light pipe clamp body and cover plate and tighten them with screws. Do not directly weld the bottom plate with pipe clamp installed.
Install the guide rail on the ground. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees. Insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put the upper half of the pipe clamp body and cover plate, which are fixed with screws.