How can light pipe clamps save installation time during installation?

How can light pipe clamps save installation time during installation?
Glass fiber reinforced polyamide pipe clamps specially designed for this application are fixed to the structural members without spot welding or welding along the entire length of the guide rail through the current conventional process. The plastic pipe clamp can be connected to the structural member to be installed only by simply placing the plastic pipe clamp on the welding stud; It can be tightened and secured with M6 x 10 hexagon socket head bolts or semicircular screws.

Therefore, users can save a lot of installation time and cost, and improve the flexibility of using C-shaped guide rail. With this application, it does not take much time to rework the weld. Another advantage is that a gap of about 1.5mm can be ensured between the installed guide rail and the mounting seat, so as to eliminate the risk of ponding.
Two types of plastic clips can be effectively inserted into the open end of the guide rail. In addition to fixing a single guide rail, multiple guide rails can also be connected together.
As an economical method of fixing parts, welded studs have been used in many industries, sometimes even a feasible solution. Since the entire surface of the copper plated stud is connected to the base, the connection is very firm. Due to short welding time, small material deformation, low energy consumption and dispersed thermal stress, it is also suitable for relatively thin metal sheets and heat-resistant substrates.