Rapid manufacturing method of heavy pipe clamp

Rapid manufacturing method of heavy pipe clamp

At present, the pipe clamps used to fix pipes in the market are mostly reverse clamps, that is, two semicircular pipe clamps are fixed with bolts at both ends, and the outer wall of the pipe is tightly clamped. This fixing method is slow, troublesome installation and single structure. The utility model relates to a pipe clamp, which is only applicable to one pipe fitting. The bolt is easy to rust, has short service life and low cost. Very high.

In order to solve the above technical problems, the utility model provides a light pipe clamp. The invention comprises a belt buckle, the belt buckle is provided with two bottom brackets, the lower end of the support is provided with a threaded sleeve, the opening is a ring buckle open structure of the buckle, the bottom wall of the socket is arranged on the left, the socket is provided with claws, the top opening arranged on the inner wall of the socket mating plug is buckled, and the plug is provided with a plurality of claws matched with the reverse tooth gap, After the fixed mutual engagement is pressed, the bayonet shaped esophagus between the plug and the socket. The quick pipe clamp is provided with an opening at the rear side of the left threaded sleeve and the front side of the right threaded sleeve. The top of the outer wall of the socket is provided with an arc end extending to the left. The bottom end of the pipe clamp plug is provided with an arc end.

The new heavy pipe clamp has a novel structure. The whole pipe clamp is composed of a support and a ring buckle. A threaded sleeve is installed on the support. Several inverted teeth are designed in the plug end at the butt joint of the ring buckle. The opening at the end of the socket is designed. The inner wall of the socket is designed with inverted teeth corresponding to the inverted teeth. The plug is inserted into the socket, and the inner wall of the socket is designed with inverted teeth. The teeth are clamped in one of the inverted slots to lock the buckle. The design of multiple inverted slots can adapt to different sizes of pipe fittings. Reasonable design, fast, convenient and practical installation.

The structure of the pipe clamp is novel. The whole pipe clamp is composed of a bracket and a ring buckle. A spiral sleeve is installed on the support. The end of the ring buckle sleeve is designed with multiple inverted teeth. The inner wall of the sleeve opening is designed with inverted teeth suitable for the inverted tooth slot. The inner wall of the socket is inserted into the plug, and the inverted teeth are clamped in one of the inverted tooth slots to realize the locking of the ring buckle. Multiple inverted slots make it suitable for dimensionless pipe fittings, with reasonable design, fast installation, convenience and practicality.