How to install the light pipe clamp?

How to install the light pipe clamp?
Pipe clamp is a kind of hardware installed on the track for welding. The main function of pipe clamp is fixation. And the pipe clamp can generally rotate 90 degrees. It can be embedded inside the nut. Pipe clamps are mainly used for some light pipes. It can also be used for heavy pipes and double series pipes. It is a product that can be used in ordinary mechanical pressure pipe and high mechanical pressure pipe.
1. Application scope of pipe clamp light series pipe clamp is applied to ordinary mechanical pressure pipes of 6 size series. The outer diameter of the pipe is 6-57mm. Double series pipe clamps are used for mechanical pressure pipes of 5 size series. The outer diameter of the pipe is 6-42mm. Heavy series pipe clamps are used for high mechanical pressure pipes of 8 size series. The outer diameter of the pipe is 8-273mm.

2. Characteristic density, elastic modulus, impact toughness, bending strength, tensile strength, color and temperature resistance of pipe clamp material
3. The pipe clamp installation procedure is assembled on the welding plate before assembly. In order to better determine the direction of the clamp, it is recommended to mark the fixed position first. After welding, weld, insert the lower half of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the pipe clamp body and cover plate. Tighten with screws. Do not directly weld the bottom plate with pipe clamp installed. Install on the ground guide rail. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut in.