The double pipe clamp manufacturer introduces the pipe clamp device procedure

The double pipe clamp manufacturer introduces the pipe clamp device procedure
Procedure for stainless steel pipe clamp device
Assembly on welded plate
Before assembly, in order to better confirm the direction of the clamp, it is suggested to mark the fixed position first, then weld, embed the lower part of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the pipe clamp body and the cover plate and tighten it with screws.
Do not directly weld the bottom plate with pipe clamp installed.
Install the guide rail on the ground. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90
Insert the lower half of the pipe clamp body into the nut, place the pipe to be fixed, and then place the upper half of the pipe clamp body and cover plate, which are fixed with screws.
For stacking assembly, the guide rail can be welded on the foundation or fixed with screws. First install the lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, and pass through the anti loosening cover plate to prevent it from rotating. Then install two pipe clamps in the same way as above.
For the assembly of the elbow, the elbow shall be directly fixed with SKF pipe clamps at the front and rear of the elbow. It is suggested that such support points should be fixed.
Pipe clamp is a standard part for fixing pipeline, which is composed of base plate, cover plate, pipe clamp body and bolts. Its materials are divided into carbon steel, stainless steel, polypropylene, nylon, aluminum alloy and other varieties. The device can be installed on the guide rail, and then the guide rail is welded on the foundation; The pipe clamp base plate can also be directly welded to the steel plate or equipment steel beam. The pipe clamp is simple and strong, and the device is convenient and fast. It is an essential part in pipeline construction.
Pipe clamp classification
1. It is divided into: full circle heavy pipe clamp, full circle light pipe clamp, long head to half pipe clamp, short head to half pipe clamp, rotary pipe clamp, rotary felt pipe clamp, J-type pipe clamp, square pipe clamp, special-shaped pipe clamp, etc.
2. According to material: Plastic ABS pipe clamp, aluminum alloy pipe clamp, stainless steel pipe clamp, carbon steel pipe clamp, nylon pipe clamp, bakelite pipe clamp, etc. It is classified according to common materials in the market.