Installation method of U-shaped pipe clamp

The U-shaped pipe clamp uses a pipe fitting commonly used in plumbing installation to fix the pipe
1. Material properties: density, bending strength, impact toughness, compressive strength, elastic modulus, tensile strength, temperature resistance and color
2. Installation procedure: before assembly on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixed position first, then weld, insert the lower half of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the pipe clamp body and the cover plate and tighten it with screws. Do not directly weld the bottom plate with pipe clamp installed.
3. Purpose: it is used for fixing the ground (note that drilling and fixing are not allowed on the geothermal ground or where there are pipelines on the ground). The live line does not go through the gypsum line, and the pipes in which the ground is leveled should also be fixed.

Let's look at the following specific steps:
The installation steps and methods of U-shaped pipe clamp are as follows: provide U-shaped claws, and the claws are provided with four claws; Provide two U-shaped bayonets; Provide a counterweight; Provide four U-shaped supports; The U-shaped claw is formed by injection molding with plastic material; During assembly, the U-shaped bayonet is attached to the U-shaped claw, the four U-shaped supports are respectively fixed on the four claws of the U-shaped claw, and the U-shaped support is close to the counterweight block; Clamp the U-shaped bayonet and the counterweight with the U-shaped claw, and then fix the U-shaped bayonet and the counterweight block by welding. The U-shaped claw tooling device obtained by the invention has the advantages of simple processing, low cost, will not affect the production line assembly with the size fluctuation of parts, and can better meet the welding assembly requirements.