Production technology and advantages of double pipe clamp guide rail?

Production technology and advantages of double pipe clamp guide rail?
The material of plastic pipe clamp guide rail is mainly divided into carbon steel and plastic, the upper cover plate and lower bottom plate are carbon steel, and the middle pipe clamp body is plastic. The plastic inside is not ordinary plastic, but highly polymerized. It is made by sheet metal, stamping and other processes. Its surface treatment method is galvanized. It can also be treated according to the specific environment and customer requirements, so as to effectively prevent the surface oxidation and the necrosis of the plastic part of the pipe clamp. The utility model is composed of three parts: upper and lower plates, pipe clamp body, screws and nuts.

The pipe clamp guide rail has the advantages of simple structure, beautiful appearance, standardized installation and convenient disassembly. It can be installed horizontally and vertically. The pipe clamp guide rail has the advantages of * special shock absorption, silencing and corrosion resistance. It is an ideal fastener in line with the national standard.
Before assembly on the welding plate, in order to better determine the direction of the guide rail nut, it is recommended to mark the fixed position first, then weld, insert the lower half of the pipe clamp body, and place the pipe to be fixed. Then put on the other half of the pipe clamp body and the cover plate and tighten it with screws. Do not directly weld the bottom plate with pipe clamp installed.
Install the guide rail on the ground. The guide rail can be welded on the foundation or fixed with screws. Then push the guide rail nut into the rail and turn it 90 degrees. Insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put the upper half of the pipe clamp body and cover plate, which are fixed with screws.
For stacking assembly, the guide rail can be welded on the foundation or fixed with screws. First install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, and prevent it from rotating through the anti loosening cover plate. Then install and pipe clamp in the same way as above.